Pagina 4 di 4 PrimaPrima ... 234
Risultati da 31 a 35 di 35
  1. #31
    Utente Junior
    Iscritto dal
    2007
    Messaggi
    96
    Professione
    Uff Tecnico
    Regione
    PG
    Software
    NX7.5

    Predefinito

    Citazione Originariamente Scritto da The_Matrix Visualizza Messaggio
    Hi My friend.
    How are you?
    Hope it's all right...

    Yes, we're just presenting the NX8 and we'll be ready for another big version next year: 8.5 (I hate this way to name our product... but it's a marketing choice...).
    Expect many breakthrough in the next couple of years.
    Per chi di voi ha accesso ha accesso al GTAC

    http://bbs.industrysoftware.automati...371#post185371


    Per gli altri, il succo è questo: (parte di una lunga discussione)


    Re: Can NX7.5 files be opened in NX7?

    "Dave Riek" <driek@apollo-tool.com> wrote in message
    news:4bf3cbd4$1@bbsnotes.ugs.com...
    >
    > Is the Mid-Point(7.5, 8.5, 9.5) release going to be the 'norm' from now
    > on?

    See, this is what I mean by rumors!!!!!

    NO, NX 7.5 was a special situation which I hope never happens again, PERIOD.

    --
    John R. Baker, P.E.
    Product 'Evangelist'
    Product Design Solutions
    Siemens PLM Software Inc.
    Industry Sector
    John.R.Baker@siemens.com

    May 19th, 2010, 08:11 PM #22

  2. #32
    Utente Senior L'avatar di The_Matrix
    Iscritto dal
    2008
    Messaggi
    1797
    Professione
    Industry Leader - Automotive & Machinery
    Regione
    Mi piacerebbe lavorare in California... Invece sto in Piemonte. Pazienza...
    Software
    NX10/TC10/4GD

    Predefinito

    Citazione Originariamente Scritto da bafio Visualizza Messaggio
    Per chi di voi ha accesso ha accesso al GTAC

    http://bbs.industrysoftware.automati...371#post185371


    Per gli altri, il succo è questo: (parte di una lunga discussione)


    Re: Can NX7.5 files be opened in NX7?

    "Dave Riek" <driek@apollo-tool.com> wrote in message
    news:4bf3cbd4$1@bbsnotes.ugs.com...
    >
    > Is the Mid-Point(7.5, 8.5, 9.5) release going to be the 'norm' from now
    > on?

    See, this is what I mean by rumors!!!!!

    NO, NX 7.5 was a special situation which I hope never happens again, PERIOD.

    --
    John R. Baker, P.E.
    Product 'Evangelist'
    Product Design Solutions
    Siemens PLM Software Inc.
    Industry Sector
    John.R.Baker@siemens.com

    May 19th, 2010, 08:11 PM #22
    Purtroppo per il BVJ (Buon Vecchio John) non è vero.
    Almeno per la 8.5 sarà così.
    Oddio, anche il MKTG può cambiare idea eh... e farla saltare, dandogli nome NX9... Who Knows?

    PS. La NX8 non sarà come la NX7, cioè una Crappy Release da evitare come la peste... sarà una Major a tutti gli effetti, mentre la NX8.5, pur essendo anche lei una Major (quindi incompatibile all'indietro con la 8) avrà più che altro nuovi moduli, come il CPD. PERIOD. ahahha
    BG UgoverALL - Siemens PLM

  3. #33
    Utente Standard
    Iscritto dal
    2010
    Messaggi
    449
    Professione
    Progettista
    Regione
    Piemonte
    Software
    NX8 TC9

    Predefinito NX 8 Supported Platforms - Windows

    NX 8 Supported Platforms - Windows

    August 2011

    This document outlines the supported operating systems (Windows) for NX8.

    Overview

    Customers moving to Windows 7 must run NX 64-bit, as SPLM is not certifying
    NX 32-bit on Windows 7. The increased memory requirements of Windows 7
    make 64-bit the only logical choice. For Windows 7 the only NX choice is
    NX-64/Windows 7-64.

    Support for Windows Vista on NX8 will be limited in order to allow SPLM to
    exploit the full benefits of Windows 7. Although Windows Vista should
    work, SPLM is no longer testing or certifying Windows Vista. There are no
    plans to certify any new hardware on Windows Vista.

    SPLM will support Windows XP (both 32-bt and 64-bit versions) running NX8
    but it will be conditionally based on available support provided by
    Microsoft as Windows XP reaches its end of life and the availability of 3rd
    party software and drivers. This support is to allow customers enough time
    to migrate to Windows 7 or alternatives like Linux or MacOS. The NX
    Windows development, testing and certification platform going forward is
    Windows 7 64-bit. There will be no new hardware certification testing on
    Windows XP starting with NX8.


    Windows 7 Details

    • Windows 7 64-bit is the recommended Windows platform for NX8. There
    is no 32-bit NX support for Windows 7. The memory limitations of a
    32-bit have been forcing SPLM customers to 64-bits as operations
    systems, applications and data models continue to grow. SPLM cannot
    emphasis the importance of customers moving to Windows 7 64-bit.

    • The server version of W7 (Server 2008R2) is 64-bit only.

    • Workstations and mobile laptops already come with 64-bit versions of
    W7 as standard. Many consumer systems ship with the 64-bit home
    version.

    • SPLM has found that W7 requires significantly more memory when
    compared to WXP. Independent customer testing as well as testing
    performed by our OEM partners confirmed this. The recommended memory
    requirement for NX on W7 is 6GB, which necessitates Windows 7 64-bits.


    Windows Vista

    • With the success of Windows 7, SPLM is not only moving its development
    environment to Windows 7 but also has begun taking advantage of new
    and exciting Windows 7 features. Therefore, SPLM cannot guarantee
    compatibility of NX8 on Windows Vista.

    • Windows Vista support is limited to the extent that SPLM can duplicate
    reported problems on Windows 7. There is no new hardware
    certification testing planned for Windows Vista. All Windows
    certification and testing is migrating to Windows 7 64-bit only.

    • Windows Vista users should consider moving to Windows 7.


    Windows XP

    • Windows XP has reached its logical end of life. Microsoft mainstream
    support actually ended in April of 2009 with optional paid support
    ending by April 2014. Unless customers purchased extended support
    from Microsoft within 90 days, they no longer can purchase support.
    SPLM support for Windows XP is limited to the extent that SPLM can
    duplicate problems on Windows 7. Therefore, Windows XP specific
    issues may not be resolved.

    • At such time, that SPLM can no longer get updates, patches or drivers
    from Microsoft or 3rd party hardware/software partners, SPLM will
    drop all support for WXP. It is anticipated that this will occur
    during the lifecycle of NX8 therefore not all “dot” releases of NX8
    will be supported.

    • There will be no new Windows XP related hardware certification
    starting with NX8 and therefore it is recommended customer move
    to Windows 7 64-bit.


    General FAQ’s

    Q1: Which version of NX will be the last to support WXP?
    A1: NX 8 is the last version to support WXP but this support is
    conditional since Windows XP is at its logical end of life.

    Q2: Why is support conditional?
    A2: Mainstream Microsoft support for Windows XP actually ended in
    April 2009 so even today there is limited ability to provide
    fixes to Windows XP. There are many issues supporting an
    operating system that has reached its EOL including the ability to
    get support from 3rd party vendors. Since SPLM has no control
    over these vendors, our ability to get fixes, updates and most
    importantly drivers is a serious concern.

    Q3: Is there any chance of also getting NX 9 to be supported with
    Windows XP?
    A3: NO.

    Q4: Why will we not support 32-bit NX on Windows 7?
    A4: The requirements of Windows 7, as well as high-end applications
    like NX, dictate 64-bits. The recommendation today for Windows 7
    and NX7.5 is 6GB.

    Q5: What changed in Windows 7 that required so much more memory?
    A5: It is difficult to discuss the differences in this document but it
    has been well documented that Windows 7 requires considerable more
    resources (disk, memory and processor).

    Q6: I heard that 64-bits has problems and is not reliable.
    A6: When Windows XP 64-bit first came out years ago, there were some
    problems but they have been resolved long ago. SPLM would
    not move our development environment to Windows 7 64-bit if we
    had any reservations on its performance or quality.

    Q7: I understand that running on 64-bit OS is slower compared to
    32-bits.
    A7: What will be slow is running NX on a 32-bit system that is under
    configured with too little memory. The memory limitation on
    32-bits is 4GB with applications only able to address
    approximately 3GB.

    Q8: Why is Vista not supported anymore?
    A8: Although Vista and W7 started with the same kernel, there are
    differences and the future is W7. Therefore, SPLM is no longer
    testing or certifying versions of NX on Vista.

    Q9: What happens if I decide to run NX8 on Vista, will I be supported?
    A9: SPLM expects Vista will work and you may never have any problems
    but there is always some risk. NX8 issues will be tested on
    Windows 7 systems. If there is a failure running Vista that
    cannot be duplicated on Windows 7 it will then be assumed the
    problem is Vista related and may not be fixed.

    Q10: What happens if I decide to run NX8 on WXP, how will I be
    supported?
    A10: SPLM has tested Windows XP as part of the normal development
    release cycle just as Windows 7 is tested, but there is always
    a risk that problems may develop that cannot be fixed.

    Q11: Why might Windows XP bugs not be fixed?
    A11: As noted before, Microsoft mainstream support actually ended in
    April of 2009. Many 3rd party vendors have begun to drop support
    and SPLM may not be able to get access to fixes, updates or
    driver needed to fix bugs. Hardware vendors can no longer
    provide WXP as part of their systems and in time, it will become
    difficult if not impossible to get proper drivers.

    Q12: Will WXP be support throughout the life of NX8?
    A12: Since an NX product release cycle normally covers several years
    there is no way to guarantee that SPLM will be able to support
    throughout the entire cycle.

    Q13: Why is SPLM no longer certifying hardware on Windows XP?
    A13: As of October 2010 Windows XP cannot be purchased anymore. In
    addition, there are no retail sales and hardware vendors cannot
    pre-install Windows XP. Vendors may or may not provide drivers
    for new hardware so any installation of Windows XP on new hardware
    would require a custom installation. Without a standard Vendor
    provided and supported installation, certification is impossible.
    Grazie...

  4. #34
    Utente Senior L'avatar di The_Matrix
    Iscritto dal
    2008
    Messaggi
    1797
    Professione
    Industry Leader - Automotive & Machinery
    Regione
    Mi piacerebbe lavorare in California... Invece sto in Piemonte. Pazienza...
    Software
    NX10/TC10/4GD

    Predefinito

    Durante una attività ho appena verificato che una parte non si rigenerava su WXP 32...
    Messa su W7 64 era OK.
    Risposta della R&D: E' un problema di fault su un double che fisseremo... usate W7 64.
    BG UgoverALL - Siemens PLM

  5. #35
    Utente Standard L'avatar di flaviobrio88
    Iscritto dal
    2010
    Messaggi
    435
    Professione
    AE
    Regione
    World
    Software
    ---------------

    Predefinito

    Citazione Originariamente Scritto da The_Matrix Visualizza Messaggio
    ...
    Risposta della R&D: E' un problema di fault su un double che fisseremo... usate W7 64.

    con scappellamento a destra o sinistra?


  • Pagina 4 di 4 PrimaPrima ... 234

    Discussioni Simili

    1. NX8 - Topic Ufficiale
      Di The_Matrix nel forum NX (Unigraphics)
      Risposte: 29
      Ultimo Messaggio: 09-05-2012, 23: 56
    2. Primo draft ufficiale per USB 3.0
      Di arri nel forum Hardware
      Risposte: 1
      Ultimo Messaggio: 19-08-2008, 21: 24
    3. [Recuperato] 2005 ufficiale
      Di RUGGIUNO nel forum Creo Direct/Modeling (Ex CoCreate)
      Risposte: 0
      Ultimo Messaggio: 17-02-2008, 14: 01
    4. forum ufficiale FeatureCAM ed altro
      Di Meccbell nel forum FeatureCAM
      Risposte: 1
      Ultimo Messaggio: 08-01-2008, 11: 03

    Segnalibri

    Segnalibri

    Permessi di Scrittura

    • Tu non puoi inviare nuove discussioni
    • Tu non puoi inviare risposte
    • Tu non puoi inviare allegati
    • Tu non puoi modificare i tuoi messaggi
    •  





    CAD3D.it - la community dei progettisti